This Python application connects to an X45 MPPT solar charge controller via Bluetooth Low Energy (BLE).

Renovate Bot 520ac781d3 Update dependency aiomqtt to v2		4 ヶ月前
images	56a50038f2 init	1 年間前
.gitignore	56a50038f2 init	1 年間前
LICENSE	56a50038f2 init	1 年間前
README.md	20a4601f8d replace paho-mqtt with aiomqtt	1 年間前
bleclient.py	b31cd92caf fix unhandled exceptions on mqtt disconnect	1 年間前
crc.py	56a50038f2 init	1 年間前
main.py	b31cd92caf fix unhandled exceptions on mqtt disconnect	1 年間前
renovate.json	d23f27c3aa Add renovate.json	1 年間前
requirements.txt	520ac781d3 Update dependency aiomqtt to v2	4 ヶ月前

Solarlife MPPT BLE Client

This Python application connects to an X45, 10 A, MPPT solar charge controller via Bluetooth Low Energy (BLE). It reads the data from the charge controller and publishes it to HomeAssistant using MQTT.

The application establishes a connection to the MQTT broker and the BLE device, retrieves the details from the charge controller periodically, and publishes the data to MQTT topics. HomeAssistant can then subscribe to these topics to display the data in its user interface.

Requirements

Python 3.7+
Bleak - A BLE library for Python
aiomqtt - A MQTT library for Python

Installation

Clone the repository:

git clone https://github.com/subDesTagesMitExtraKaese/solarlife-mppt-ble-client.git

Change into the project directory:
```
cd solarlife-mppt-ble-client
```
Install the required Python packages using pip:
```
pip install -r requirements.txt
```

Usage

Run the application by providing the required command-line arguments:

python main.py <BLE device address> --host <MQTT broker host> --port <MQTT broker port> --username <MQTT username> --password <MQTT password>

Replace <BLE device address> with the Bluetooth address of your MPPT solar charge controller. The other arguments are optional and can be used to customize the MQTT connection.

The application will connect to the MQTT broker and the BLE device. It will periodically retrieve the data from the charge controller and publish it to MQTT topics.
HomeAssistant can subscribe to the MQTT topics to display the published data in its user interface.

MQTT Topics

The application publishes the data to MQTT topics in the following format:

Sensor state topic: homeassistant/sensor/solarlife/<key>/state
Sensor configuration topic (MQTT Discovery): homeassistant/sensor/solarlife/<key>/config

The <key> represents the data field from the charge controller. For example, battery_percentage, battery_voltage, etc.

HomeAssistant Integration

To integrate the published data into HomeAssistant, you can use the MQTT integration and configure it to subscribe to the MQTT topics published by the BLE client.

Here's an example configuration in HomeAssistant's configuration.yaml file:

sensor:
  - platform: mqtt
    name: "Solarlife Battery Percentage"
    state_topic: "homeassistant/sensor/solarlife/battery_percentage/state"
    unit_of_measurement: "%"

Replace state_topic with the appropriate MQTT topic for each sensor field you want to display.

Contributing

Contributions are welcome! If you encounter any issues or have suggestions for improvements, please open an issue or submit a pull request.

License

This project is licensed under the MIT License.

README.md