subDesTagesMitExtraKaese
21e367df0f
formatting
|
3 tahun lalu | |
|---|---|---|
| .. | ||
| .settings | 4 tahun lalu | |
| RemoteSystemsTempFiles | 4 tahun lalu | |
| .cproject | 4 tahun lalu | |
| .force_relink | 4 tahun lalu | |
| .project | 4 tahun lalu | |
| Display.h | 3 tahun lalu | |
| Main.c | 3 tahun lalu | |
| Makefile | 4 tahun lalu | |
| Pong_Code.elf | 4 tahun lalu | |
| create-this-app | 4 tahun lalu | |
| readme.txt | 4 tahun lalu | |
| structs.h | 3 tahun lalu | |
readme.txt
Readme - Hello World Software Example
DESCRIPTION:
Simple program that prints "Hello from Nios II"
The memory footprint of this hosted application is intended to be small (under 100 kbytes) by default
using a standard reference deisgn.
For an even smaller, reduced footprint version of this template, and an explanation of how
to reduce the memory footprint for a given application, see the
"small_hello_world" template.
PERIPHERALS USED:
This example exercises the following peripherals:
- STDOUT device (UART or JTAG UART)
SOFTWARE SOURCE FILES:
This example includes the following software source files:
- hello_world.c: Everyone needs a Hello World program, right?
BOARD/HOST REQUIREMENTS:
This example requires only a JTAG connection with a Nios Development board. If
the host communication settings are changed from JTAG UART (default) to use a
conventional UART, a serial cable between board DB-9 connector and the host is
required.
DESCRIPTION:
Simple program that prints "Hello from Nios II"
The memory footprint of this hosted application is intended to be small (under 100 kbytes) by default
using a standard reference deisgn.
For an even smaller, reduced footprint version of this template, and an explanation of how
to reduce the memory footprint for a given application, see the
"small_hello_world" template.
PERIPHERALS USED:
This example exercises the following peripherals:
- STDOUT device (UART or JTAG UART)
SOFTWARE SOURCE FILES:
This example includes the following software source files:
- hello_world.c: Everyone needs a Hello World program, right?
BOARD/HOST REQUIREMENTS:
This example requires only a JTAG connection with a Nios Development board. If
the host communication settings are changed from JTAG UART (default) to use a
conventional UART, a serial cable between board DB-9 connector and the host is
required.